Air-box Adapter, Mikuni TM33 Carb 12mm ext. reducin to 49mm OD

$28.60 AUD

In stock

Description

This Mikuni 50mm ID air-box adapter is designed for use on our TM33-8012 carb, when fitting to Honda XR250 mechanical carb models and other motorcycles requiring a 12mm extension at 49mm diameter when wanting to use the standard OEM air-box. This adapter may require shortening for some applications where correct length sleeves are not available. The adapter is made from silver anodized aluminum with a 2mm wall thickness for strength and rigidity.

This air filter, air cleaner, air box adapter sleeve has been designed and manufactured for a good interference fit over the Mikuni carburetor spigot.

The sleeve has a 50mm ID at the carburetor spigot with a 12mm extension reducing to 49mm OD for smaller air box insertion,

This spigot must be installed by a competent person. It is recommended to carefully remove with a fine file any protruding castings found on some carburetor spigots before pressing on the new sleeve.  When fitting the sleeve we recommend the use of Loctite activator and high strength 620 retaining compound or high strength two pack epoxy. The adhesive besides helping bond both items together will fill and seal any imperfections found on some carburetor spigots and also acts a a slight lubricant for the fitment.

Reviews

There are no reviews yet.

Be the first to review “Air-box Adapter, Mikuni TM33 Carb 12mm ext. reducin to 49mm OD”

Your email address will not be published. Required fields are marked *