Cable, Mikuni VM & TM Carbs using Black MX Quick Action Throttle

$29.70 AUD$40.00 AUD

or 4 fortnightly payments from $7.43 AUD with Afterpay More info

Clear

Description

Select from the purchase drop list either the cable with the standard 70 degree lower pipe or one of the two options with the the 90 degree low profile fitting which screws directly into the top of the carb replacing the Mikuni top carb adjuster. Note: if using either of the 90 degree cables that VM carbs have to be removed from the motorcycle and the carb itself spun to unscrew the carburetor top.

The regular lower 90 degree fitting only requires around 27mm of space above the carb. We also have a fully threaded version for even tighter applications.  This fitting we’ve had specially made with an extra 10mm of thread both sides for more adjustment less clearance, allowing them to be wound further down into the top of the carb. When fully wound down this fitting only requires 22mm of space above the carb.

This Mikuni throttle cable is for use with our Quick Action MX throttle when attaching to Mikuni VM carbs, with the keyhole type cable attachment system, ranging from 30mm up to 38mm & all TM non pump Mikuni carburetors 36mm thru to 41mm.

The exposed inner wire length is matched for use in Mikuni VM carbs using keyhole type cable attachment to the throttle valve. If your motorcycle has an OEM VM carb version, fitted with a cable holder that is screwed to the slide, this cables use is restricted to carb sizes of 36mm and larger.

This throttle cable set comes with a 10mm top adjuster fitting and inner wire protrusion for coupling with our black MX side pull Quick Action Throttle assemblies. If wishing to use this cable with an alternate or OEM throttle housing please contact us to discuss your required changes and related charges.

These premium grade cables use a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance.

All throttle cables must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with water proof grease.
If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1. This effectively washes away dirt from the cable, without clogging it.

 

Additional information

Choose Lower Fitting

70 Degree pipe, 90 Degree Std, 90 Deg Fully threaded

Reviews

There are no reviews yet.

Be the first to review “Cable, Mikuni VM & TM Carbs using Black MX Quick Action Throttle”

Your email address will not be published. Required fields are marked *