Cable, Mikuni VM & TM Using Stock Amal or Our Twin Pull Throttles

$38.50 AUD$41.80 AUD

Please take care making this cable selection and if at all unsure please contact the Mikunioz office for assistance.

Clear

Description

Identify the type of throttle you have from the picture in the product library.

We have three lengths of inner wire protrusion.

Selection 1: Suits all VM26 and VM28 plus TM28, TM32 and TM34

Selection 2: suits all TM36 and TM38 carbs and VM30 thru VM34 carbs using either type throttle plus also VM36 using the OEM slotted type throttle.

Selection 3: Being longer for VM36 using the throttle with adjuster or separate sleeve. This selection also applies for all VM38’s

The exposed inner wire length is matched for use in Mikuni VM carbs using keyhole type cable attachment to the throttle valve. If your motorcycle has an OEM Japanese Motorcycle VM carb version (which normally never run properly on 4 strokes), fitted with a cable holder that is screwed to the slide, please contact the office to determine your best option.

The outer cable from the carb top adjuster to the throttle measures 1020mm. This length can be sold shorter with a modification fee, on request.

These premium grade cables use a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance.

All throttle cables must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with a light water proof grease.
If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1. This effectively washes away dirt from the cable, without clogging it.

 

Additional information

Select Cable Option

VM26 28 TM28 32 34, VM30 32 34 VM36 slot, VM36 w Adj Throttle

Reviews

There are no reviews yet.

Be the first to review “Cable, Mikuni VM & TM Using Stock Amal or Our Twin Pull Throttles”

Your email address will not be published. Required fields are marked *