Description
This Mikuni RS38 carburetor Kit is for direct fitment to most Suzuki Bandit Air/Oil Cooled Engines. They will breathe a whole new lease of life into your machine with an up to 25% increase in power, whilst making it perform and operate as it should with no hesitations or flat spots.
You will very quickly realize that the expense of a rebuild of your old worn OEM carbs can far exceed the cost of these new units and unfortunately as with many rebuilds now days you only have the option in many cases of gambling with very poor quality aftermarket parts. Considering this and if intending to ride and enjoy your motorcycle it makes good sense to retire your OEM carbs into the cupboard and step up to a set of RS’s.
Before rushing in and ordering please firstly check your carb spacing and carbie sizes for compatibility. These are not suited for downdraft engines.
This Mikuni kit comes with the carb  throttle port center to center spacing’s listed below for direct fitment to Suzuki Bandit air/oil cooled Engines.
A= 77mm (spacing center to center between carb 1 & 2)
B= 93mm (carb 2 & 3)
C= 77mm (carb 3 & 4)
The carb total front to back length of 100mm replaces OEM carbs measuring 96 thru 100mm and comes with either a 55mm inlet outside diameter for use with POD filters or velocity stacks or with fitted sleeves increasing the inlet diameter to 58mm or 62mm for standard air-box compatibility. Do check your inlet diameter if wanting to use your air box as have found the odd carbs with larger size where we need to fit 62mm sleeves rather than 58. The OEM carbs are oval where when taking an average across the horizontal and vertical measurements you’ll determine the best suited option. The carb outlet diameter at the motor end is 42mm.
All sleeves are CNC machined, silver anodized and permanently set in place using 620 Loctite.
PLEASE SELECT YOUR CARBURETOR AIR-FILTER AND ENGINE END, OUTLET SPIGOT DIAMETERS WHEN PURCHASINGÂ
Pilot Jet: VM28/486-17.5, Needle: 9DZH1, Needle Jet: P-4 (568 Series), Main Jet: N100.604-120/130
Your stock throttle cables will match to these carbs, where we also have available in the RS accessories page either our road bike throttle and cable assembly (KRS-001) or a Quick action 1/4 turn throttle and cable kit (PPQA40K)
You can also buy separately either POD filters or Velocity stacks which have no form of filter in them (15, 30,50 and 75mm long) for racing
Reviews
There are no reviews yet.