Yamaha Belgarda TT600 Mikuni TM42 Pumper Single Carb Conversion Kit.

$890.00 AUD$1,060.00 AUD

SKU: N/A Categories: ,


This Mikuni TM42 Pumper Flatslide single carburetor conversion kit is for fitment electric start Belgarda TT600 models.

These kits are your most impressive performance available but do require a frame (as shown in the product picture library) and often a tank modification making a 15-20mm depression for cable bracket clearance for fitment. A competent person can easily heat and depress the contact area to allow carb and throttle mechanism clearance on this tank. After thorough removal of all fuel from inside the tank, slowly heat an extended area using a heat gun. Allow plenty of time for the heat to absorb right through the Polyethylene. If the heated area gets shiny or wet in appearance this indicates the surface is melting and you do not have full heat penetration. Once it starts to become soft when pressing, carefully depress the area using a golf ball of similar object. The polyethylene material will not lose any of its strength or integrity once cooled back down as long as you allow for an even spread without excessive thinning. If at all concerned we highly recommend having this professionally done or otherwise buy an aftermarket tank. The improvement in performance far outweighs any inconvenience. The tank pictured took this customer around a 1/2 hour to do with a couple of test fits before perfection.

The TM42 pumper is a huge step up in performance over your OEM carbs and an easy resolution to non repairable, worn out stock units. These carbs are also a popular upgrade  for Honda XR600, XR650, Suzuki DR650, Kawasaki KLR650 and KTM riders, especially when you have worn out their OEM carbs or are just over some of their inherent problems. All this means getting the full enjoyment out of your motorcycle has never been so easy, say goodbye to hard starting, hesitations and flat spots. A wheel stand in an extra two gears is usually the expected norm.

Kit Options: This kit is available in Basic form for use with a pod filter (not supplied) or with our air-box connection kit. For airbox connection on the Belgarda, the connection can run straight back above the shock, where we provide a black anodised alloy plate for sealing and riveting to your OEM air-box face to seal off the remains of the twin ports after you have cut out a larger central hole. There’s an alloy flange you need to rivet to the plate using sealant ( 3 blind rivets supplied) and a length of reinforced silicon pipe for connection to the back of the carb using the provided clamps.

The kit comes with a Mikuni TM42-6 carb, cast two into one manifold with mounting hardware, heavy duty rubber engine mounting flange to isolate the heat, a 1/4 turn quick action throttle and a push/pull nylon lined cable set. There are jets fitted as well as spare main jets for WOT fine tuning.

The carb comes with a rarely ever required knob choke where if using a large aftermarket tank which hinders access to the knob, we do sell a 250mm long choke cable and universal bracket where cheaper to buy at time of purchase if you contact us.

Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For this reason, we have included what we have found to be a range of jets to allow you to tune to most variables worldwide.

You will instantly experience better throttle response, improved acceleration and performance. If chasing optimum performance check out our TM42 Pumper Carb options.

To clarify some commonly asked questions about this carb in regards to a comparison with the 40mm: 

In the late 80’s Mikuni American released the HS40 (TM40-6) as an amazing new carburetor for the Harley Davidson market, literally knocking all its competitors out of the park. We were at the San Jose Custom Chrome Show when it was released and become part of that buzz as Australian Mikuni distributor. This slide type fuel metering device basically made the competitors butterfly type carbs seem like lawn sprinklers.
With the huge increase in Harley Davidson sales this became a very lucrative market. Recognizing the potential of this market and being aware of the efforts of competitors to try and grab back their share of it made Mikuni realize the necessity of replacing the 40 with a carburetor to be the be all and end all of all carburettors. The target was to deliver unrivaled peak performance combined with smoother throttle operation and lighter throttle pull by replacing the metal on metal slide action with a slide running on roller bearings. Also a larger fuel bowl capacity was provided but most of all, superior venturi design and fuel atomization resulting in more precise mixture ratios to not only increased horsepower and torque but also to enable the fitment of a larger carb to smaller capacity engines without losing valuable bottom end power, where in fact instead gaining more. In 1994 the HSR42 was born and just like you will if you fit one to your bike, all we could say was WOW. Instant throttle response delivering 25% more horsepower and torque over the stock CV carb before even putting on a real high flow air-cleaner. As the badge says 20 years later” Still the best performance carburetor on the planet”.
Unfortunately, the TM42 only had limited sales in the Japanese single market due to it only appealing to the custom fitter as there had never been a cable set or air-box adapter available off the shelf. With the slowing of the Harley market due to fuel injection on new bikes, here in Australia, Mikunioz realized the opportunity to offer Mikuni’s best Carburetor to the big Jap single market and in late 2015 we released a range of ready to roar direct fit up kits with correct jetting and a few trick mods to make them work better than anything before on big Jap Thumpers.

The fuel consumption is way less but when comparing with the stock carbs, it all depends on how having a lot more power and torque effects your riding habits. If you can manage to back off and just have your bike perform at its present level you’ll be surprised by the fuel economy, but of course when the same amount of throttle twist becomes front wheel lifting, breaking traction action, well it’s hard to not want to go and play. If you have more horses in the paddock and you want them all to perform, you have to feed them more hay! 

You will enjoy this new carb but do be sure to hold on tight on your first test ride as she may try to spit you off if you nail it to hard.


If wishing to modify or use your existing cables or mounting flange to suit the Mikuni TM42you can purchase the carburetor, tuner jet kit and or what ever other components you want individually by following the directions below.

On the main menu to the left of the page, hover over the carb listing for TM Flatslide Pumper Carbs and then select TM42 from the drop down list. When clicking on any individual size Mikuni carb from the drop down list it will put you into a page showing not only the Mikuni carb itself but also any items relevant to that carb, being Mikuni jets, Mikuni flanges, Mikuni carb tuner kits, Mikuni cables , Mikuni throttles, Mikuni air-cleaners and a range of Mikuni carb to OEM air box adaptors etc to also suit. This also makes alternate jet selection easy for you if you have your own spec as only the type jets for that particular carb are shown.
Click on the carb itself (TM38-86) if wanting to view the full details and or to make your purchase. Then back arrow back in the carbs main page and go into the tuner kits, which show in the sales drop down list the jetting kits we have for confirmed suitable engines for that particular carb. Again thoroughly read the tuner kit description.
If you’re comfortable with making a purchase of the carb, tuner kit any or other associated components, order it on line or otherwise please call us to further discuss your needs on 0747712677.

All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to make contact with using the provided tracking number.

Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply.

Additional information

Select Your Kit Type

Basic Kit for POD use, Kit with Airbox connection


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.