Yamaha TT XT350 Mikuni TM34 Flatslide Single Carb Conversion Kit

$590.00 AUD$699.00 AUD

SKU: N/A Categories: ,

Description

This Mikuni TM34 Non Pump type TM Flatslide single carburetor conversion kit is for replacement of the OEM Yamaha twin carbs fitted to XT TT350’s. The TM34 though a budget option carb still delivers great performance improvements over OEM and Mikuni VM carbs, where unfortunately available space doesn’t allow for using a pumper carb. This is an easy solution to non repairable, worn out stock units. These have for decades been the economical replacement performance carb of choice for Honda XR riders who have worn out their OEM carbs or are just over some of their inherent problems. All this means getting the full enjoyment out of your motorcycle has never been so easy, say goodbye to hard starting, hesitations, flat spots and hold on, she’ll pull a lot harder and deliver an overall speed improvement.

We have a pictures for ID of the two frames we now currently build kits for, being usually TT350 the white frame (also pictured in Blue but referred to as WHITE) and the red frame (also pictured which is usually in Blue and Black where also sold in silver, but referred to as RED XT350), there are is also a purple frame out there and maybe others but to save confusion we will refer to the two known designs of frame types as either RED or WHITE. 

WHITE FRAME FITMENT- 

The kit comes with a Mikuni TM34-2 carb, a composite two into one manifold with gaskets and larger OD washers for use with your OEM mounting hardware, heavy duty rubber engine mounting flange with stainless steel clamps, an anodized 50mm diameter air-box adapter fitted to the carb for use with a (not supplied) foam POD or otherwise optional OEM air box blank adapter with connection pipe and clamps, a 1/4 turn quick action throttle and a nylon lined cable with a 90 degree lower fitting which screws directly into the carburetor top for clearance . There are what should be correctly sized jets fitted as well as spares for fine tuning. The carb comes with a rarely ever required knob choke where if in colder climates you find you do need to use the choke and access to the knob is an issue if using a larger than stock tank, we sell separately either a cable choke adapter kit ( MK-412 ) or a complete kit with universal bracket and 310mm long cable ( MK-412-310C ). Air filter options: We have two options where we sell a complete kit with airbox adapter with carb connection pipe (on some air-boxes a slight filing of the back plate boles may be required as we found three slightly different patterns during testing). Option two, we sell as pictured a basic kit, being carb forward only where the carb comes with the same 50mm adapter to which you can arrange yourself a connection back to a POD filter using a rubber tube at the carb (with as small a wall thickness as possible for frame and shock clearance), connected to a short length of 50mm OD exhaust pipe, this pipe will need to have an 18 degree bend in it to get a straight run back to your preferred mounting location for a UNI Filter (or similar) with sock.

RED FRAME FITMENT- (Pictures in the photo library are showing using a black frame)

This frame variant requires removal of some material above the carb for clearance where to best determine and only remove the bare minimum of material, mount the carb to the manifold sliding it up from underneath to check whilst slowly grinding away till satisfied you have a couple of mm clearance. A very small amount of material from the plate on the RH frame upright also needs removing for better clearance for the silicon elbow (you need to purchase elsewhere) to connect back to the air box.  This kit comes with a Mikuni TM34-2 carb, a composite two into one manifold with gaskets and larger OD washers for use with your OEM mounting hardware, a straight piece of heavy duty rubber sleeve and clamps, without an internal separator block allowing the carb to sit 4mm closer to the motor. A 46mm diameter air-box adapter for use with a (not supplied) length of 1 3/4″ silicon hose (with 30 degree elbow)  back to the supplied air-box RH side adapter, a blanking off disc is supplied for the LH air box port. Two hose clamps are supplied. A 1/4 turn quick action throttle and a nylon lined cable with a 45 degree lower fitting which screws directly into the carburetor top for clearance . There are what should be correctly sized  jets fitted as well as spares for fine tuning. The carb comes with a rarely ever required knob choke where if in colder climates you find you do need to use the choke and access to the knob is an issue if using a larger than stock tank, we sell separately either a cable choke adapter kit ( MK-412 ) or a complete kit with universal bracket and 310mm long cable ( MK-412-310C ).

Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For this reason, besides the set up that should be spot on, we have included spares to allow you to tune to most variables worldwide.

You will instantly experience better throttle response, improved acceleration and performance.

IF NOT WANTING TO PURCHASE THE KIT IN ITS ADVERTISED FORM PLEASE FOLLOW THE DIRECTIONS BELOW.

If wishing to modify or use your existing cables or mounting flange to suit the Mikuni TM34  you can purchase the carburetor, tuner jet kit and or what ever other components you want individually by following the directions below.

On the main menu to the left of the page, hover over the carb listing for TM Carbs (non Pump) and then select TM34 from the drop down list. When clicking on any individual size Mikuni carb from the drop down list it will put you into a page showing not only the Mikuni carb itself but also any items relevant to that carb, being Mikuni jets, Mikuni flanges, Mikuni carb tuner kits, Mikuni cables , Mikuni throttles, Mikuni air-cleaners and a range of Mikuni carb to OEM air box adaptors etc to also suit. This also makes alternate jet selection easy for you if you have your own spec as only the type jets for that particular carb are shown.
Click on the carb itself (TM38-86) if wanting to view the full details and or to make your purchase. Then back arrow back in the carbs main page and go into the tuner kits, which show in the sales drop down list the jetting kits we have for confirmed suitable engines for that particular carb. Again thoroughly read the tuner kit description.
If you’re comfortable with making a purchase of the carb, tuner kit any or other associated components, order it on line or otherwise please call us to further discuss your needs on 0747712677.

All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to make contact with using the provided tracking number.

Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply.

Additional information

Select your Model

White 350 frame Basic, White Frame w Air Box kit, RED 350 frame kit

Reviews

There are no reviews yet.

Be the first to review “Yamaha TT XT350 Mikuni TM34 Flatslide Single Carb Conversion Kit”

Your email address will not be published. Required fields are marked *