Air-box Adapter, Mikuni TM38 Flatslide Carb- 18mm ext at 63mm OD

$28.60 AUD

In stock

Description

This Mikuni TM38-85 / TM38-86 Flatslide Carburetor air-box adapter is designed for use on Honda XR650R or other Honda Carbs with a 62mm inlet spigot diameter, plus for use on other motorcycles requiring an extension when wanting to use the standard OEM air-box. This adapter may require shortening for some applications where correct length sleeves are not available. The adapter is made from silver anodized aluminum with a 2mm wall thickness for strength and rigidity.

This air filter, air cleaner, air box adapter sleeve has been designed and manufactured for a good interference fit over the Mikuni carburetor spigot.

The sleeve has a 62mm ID at the carburetor spigot with an 18mm extension at 63mm OD

This spigot must be installed by a competent person. It is recommended to carefully remove with a fine file any protruding castings found on some carburetor spigots before pressing on the new sleeve.  When pressing on the sleeve we recommend the use of a high strength 620 Loctite retaining compound or high strength two pack epoxy. The adhesive besides helping bond both items together will fill and seal any imperfections found on some carburetor spigots and also acts a a slight lubricant for the fitment.

 

Reviews

There are no reviews yet.

Be the first to review “Air-box Adapter, Mikuni TM38 Flatslide Carb- 18mm ext at 63mm OD”

Your email address will not be published. Required fields are marked *