Honda CX, Kawa KZ750 Twin 1050mm 90 Deg 2-1 Cable Kit Mikuni TM32-34

$88.00 AUD

In stock

SKU: TC-HONCX/KZ750/2-1-1050/90 Categories: , ,

Description

This Low profile 2 into 1 cable assembly is for use on Honda CX 500 and 650 Twins and Kawasaki KZ750 twins using the OEM throttle when fitting the taller Mikuni TM VM32 and TM32 non pump type carbs.

These cables come at a set outer housing (including fittings) length of 1050mm, being from the throttle inlet to the carburetor top, center. There is an extra charge if wanting this length shortened. Please if wanting a change contact the office by email or phone on 0747712677

These premium grade cables use a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance. They are supplied with 90 degree lower cable end fittings which screw directly into the top of the Mikuni Tm carbs for better petcock clearance, an inline adjuster on the top cable and a chrome OEM type top fitting for attachment to the stock Honda CX and Kawasaki Twin throttle housing.

All throttle cables must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with water proof grease.
If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1. This effectively washes away dirt from the cable, without clogging it.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products