1.Honda XR600 XR650L Mikuni TM42 Flatslide Pumper Carb KIT

(2 customer reviews)

$695.00 AUD$715.00 AUD

Available as an option with either knob or cable choke. Post 1988 XR600 require the fitment of a 650L mounting flange.

SKU: N/A Categories: ,

Description

Genuine Mikuni TM42-6 (HSR 42) Carburetor. This carburetor as only with all Mikunioz distributed products is covered by Australian product liability cover and warranties. 

The Mikuni TM42-6 HSR flows 17CFM more than our TM40-6 and incorporates many upgraded features such as a roller-bearing slide. All this when compared to you stock carb means going even faster has never been so easy, say goodbye to hard starting, hesitations and flat spots. 

These Mikuni carburetors are correctly sized and easily fitted to your Honda XR600 and XR650L stock motor mounting flange after removing the locator tags and also match the air box when using the silver anodized air-box adapter. This adapter is fitted prior to delivery when purchasing complete kits. For this Mikuni carburetor to operate correctly the motorcycles air box must be opened up to allow more air flow in. Using a hole saw, a 45mm diameter hole will be sufficient for a Suzuki DR650 but some Honda’s require way more. The best process is to keep opening up the air-box until no more improvement is noticed and you will be surprised at the difference. The kit also comes with throttle cables and a 1/4 turn quick action throttle which must be lubed before fitment. The carb comes with a couple of  Honda specific adjustments made and pre jetted for your engine. A specially made size 30 pump nozzle is fitted as the accelerator pump circuit on TM42 carbs will not work properly on Honda’s or Kawasaki’s without it.

Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For this reason, we have included what we have found to be a range of jets to allow you to tune to most variables.

Note that as pictured the return cable bell crank will foul on the 1989 and later XR600’s requiring the separate purchase from Honda of an OEM XR650L rubber mounting flange 16210-MY6-670. Some of the larger volume 650 tanks do also foul on this carb so if at all concerned please call to discuss. 07 47712677

The TM42-6 for Honda applications comes with a knob choke located on the right hand side of the carb above the outlet spigot. This may be hard to get to or not be able to be fully engaged with some large capacity tanks where when ordering you can have the carb supplied with either the knob type choke or a cable and universal mounting bracket.

This carb fits with most aftermarket large capacity tanks being the Acerbis 22 litre tank or Safari & with the IMS tank which is very close. Some larger capacity tanks do not allow the fitment of this carb without modification. A competent person can easily heat and depress the contact area around the throttle mechanism allowing for clearance on problem tanks. Polyethylene tanks start their life as lump of poly that when melted evenly spreads itself around a rotating mold, to later carefully heat with a heat gun any section of a tank and change the shape has no effect on the integrity of the poly itself unless pushed too far, thinning it. We recommend having this professionally done for the reason some people may neglect to properly remove all the fuel from an existing tank or if not competent may make a mess of it.   

Fine tuning is generally related to cam or sometimes exhaust system with the XR where the supplied setup is in most cases perfect but if you don’t get that instant “WOW I’ve got myself a crazy wheel standing machine” feeling,  it will only usually relate to main jet size and or needle clip position setting. If at all confused or in need of guidance we offer our customers, business hours phone support for any carb we sell. The TM42 for big Jap singles are now our most popular selling kits worldwide and our knowledge base for tuning to different engine configurations of all brands is extensive.

You will instantly experience way better throttle response, improved smooth acceleration, increased horsepower and torque.  Plus the bonus of better fuel economy. Dyno tests show improvements of up to and over 25% when fitted to OEM carburetored engines. To fully appreciate the potential this carburetor has you must fully read and follow the provided fitment and tuning sheets.

To clarify some commonly asked questions about this carb in regards to a comparision with the 40mm: 

In the late 80’s Mikuni American released the HS40 (TM40-6) as an amazing new carburetor for the Harley Davidson market, literally knocking all its competitors out of the park. We were at the San Jose Custom Chrome Show when it was released and become part of that buzz as Australian Mikuni distributor. This slide type fuel metering device basically made the competitors butterfly type carbs seem like lawn sprinklers.
With the huge increase in Harley Davidson sales this became a very lucrative market. Recognizing the potential of this market and being aware of the efforts of competitors to try and grab back their share of it made Mikuni realize the necessity of replacing the 40 with a carburetor to be the be all and end all of all carburettors. The target was to deliver unrivaled peak performance combined with smoother throttle operation and lighter throttle pull by replacing the metal on metal slide action with a slide running on roller bearings. Also a larger fuel bowl capacity was provided but most of all, superior venturi design and fuel atomization resulting in more precise mixture ratios to not only increased horsepower and torque but also to enable the fitment of a larger carb to smaller capacity engines without losing valuable bottom end power, where in fact instead gaining more. In 1994 the HSR42 was born and just like you will if you fit one to your bike, all we could say was WOW. Instant throttle response delivering 25% more horsepower and torque over the stock CV carb before even putting on a real high flow air-cleaner. As the badge says 20 years later” Still the best performance carburetor on the planet”.
Unfortunately, the TM42 only had limited sales in the Japanese single market due to it only appealing to the custom fitter as there had never been a cable set or air-box adapter available off the shelf. With the slowing of the Harley market due to fuel injection on new bikes, here in Australia, Mikunioz realized the opportunity to offer Mikuni’s best Carburetor to the big Jap single market and in late 2015 we released a range of ready to roar direct fit up kits with correct jetting and a few trick mods to make them work better than anything before on big Jap Thumpers.


The fuel consumption is way less but when comparing with the stock carbs, it all depends on how having a lot more power and torque effects your riding habits. If you can manage to back off and just have your bike perform at its present level you’ll be surprised by the fuel economy, but of course when the same amount of throttle twist becomes front wheel lifting, breaking traction action, well it’s hard to not want to go and play. If you have more horses in the paddock and you want them all to perform, you have to feed them more hay! 

You will enjoy this new carb but do be sure to hold on tight on your first test ride as she may try to spit you off if you nail it to hard.

 

IF NOT WANTING TO PURCHASE THE KIT IN ITS ADVERTISED FORM PLEASE FOLLOW THE DIRECTIONS BELOW.

If wishing to modify or use your existing Honda XR600, XR650 cables to suit the Mikuni TM42-6 or use a POD filter rather than the original air-box you can purchase the carburetor, tuner jet kit and or what ever other components you want individually by following the directions below.

On the main menu to the left of the page, hover over the carb listing for TM Carbs with Accel Pump and then select TM42-6 from the drop down list. When clicking on any individual size Mikuni carb from the drop down list it will put you into a page showing not only the Mikuni carb itself but also any items relevant to that carb, being Mikuni jets, Mikuni flanges, Mikuni carb tuner kits, Mikuni cables , Mikuni throttles, Mikuni air-cleaners and a range of Mikuni carb to OEM air box adaptors etc to also suit. This also makes alternate jet selection easy for you if you have your own spec as only the type jets for that particular carb are shown.
Click on the carb itself if wanting to view the full details and or to make your purchase. Then back arrow back in the carbs main page and go into the tuner kits, which show in the sales drop down list the jetting kits we have for confirmed suitable engines for that particular carb. Again thoroughly read the tuner kit description.
If you’re comfortable with making a purchase of the carb, tuner kit any or other associated components, order it on line or otherwise please call us to further discuss your needs on 0747712677.

All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to make contact with using the provided tracking number.

Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply.

Additional information

Choose Your Option

Knob Choke, Cable Choke w. Bracket

2 reviews for 1.Honda XR600 XR650L Mikuni TM42 Flatslide Pumper Carb KIT

  1. LT

    Great carb. fire right up.ran down the road. Big difference on low and mid range… at 6,000feet..

  2. John

    I purchased a 42mm pumper kit for my XR600R here in the States. I was running a Lectron (nothing wrong with it it ran fine) but I prefer pumpers and have more experience with them. Ive bought a number of kits from Mikuni Oz and the service is excellent and receive the item in about a week. The carb bolted right up (bought a new intake) and undid the airbox and it fitted very easily. The bike fired right up, ran crisply and more power every where. Im very happy with it. best carb kit Ive purchased

Add a review

Your email address will not be published. Required fields are marked *