1. TM36-68 Mikuni 36mm TM Mikuni Carb w Accelerator pump

$520.00 AUD

In stock

SKU: TM36-68 Category:


The Mikuni TM36-68  is supplied with the following factory jetting installed:

Pilot jet 12.5 (VM28/486),  Needle 9DZH6-50,  Needle Jet P-8 (568 Series),  Main Jet 130 (N100.604),  Air Jet 1.0

Mikuni TM36-68 Dimension A= 42mm, B= 100mm, C= 176mm, D= 54mm. Total width=75mm

Going fast has never been so easy.  These carburetors can be adapted to a number of different applications from single to multi-cylinder engines, giving better throttle response, improved acceleration, increased horsepower and torque.  In a number of instances Dyno tests have shown improvements of up to 25%  when fitted to same size CV carburettored engines.

This Mikuni TM36 was originally  introduced as a stock carb for a limited time on the Husky 410 and does require the replacement of some jets to perform properly in any situation so the requirement of purchasing the base tuner kit from our tuner kit listing is essential unless your particular engine is also listed there. This carb delivers exceptional performance improvements on any 4-stroke single engine 350cc through to 500cc and on any 700 to 900cc twin that they will physically fit to.

Compare your existing carbs dimensions against the A, B and D  above for direct replacement compatibility and study the pictures taken on our graph board (the black lines are at 10mm spacings with 1mm increments in between), to determine available space if fitting in an unpublicized application.

With an unmatched air-cleaner spigot diameter or carb length and if still wanting to use the OEM air box rather than a Pod, check out our “Air-cleaner adapter listing”. If you can’t find a match, the manufacturing of special sleeves or extensions for some applications may be necessary. This is easily done by your local machine shop or any muffler shop with a pipe expander and the results far surpass the inconvenience.

If your OEM cables don’t match and if not available in our “Throttle and Cable assembly list”, you may well also need to have yours modified or new ones made for your application.

(The picture with the cables shows the required length of inner cable protrusion and securing fitting at the carb end on basically a maximum length adjustment using the outer two holes on the rotor. The back board is divided into 1 and 10mm increments)

All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to make contact with using the provided tracking number.

Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply.




There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.