Triumph T140V Mikuni TM32 Carb Kit, Using OEM Air-Box

$1,050.00 AUD

Only 2 left in stock

SKU: T140V/TM32-OEM/AB Category:

Description

This Triumph T140V and oil in the frame model T120 kit, offers Mikuni’s best performing carbs option whilst being able to retain the OEM side covers and standard motorcycle look. Being able to use the oem air-box connection boot only applies when using our much shorter TM flatslide type carbs in combination with these special mounting spigots and rubber boot set.

Going  even faster has never been so easy when selecting the TM’s over the VM option, where again say goodbye to hard starting, dribbling ticklers, irregular idle from fast wearing slides, hesitations, and flat spots.  The Dual Mikuni TM32 Flatslide carburetor kit is easily fitted to your T140V Triumph and the improvement is instant.

This kit includes- Two pre-jetted TM32 Carbs, spare up and down size main jets for wide open throttle test runs to determine the fastest/best, CNC machined super short silver anodized manifolds with gaskets and  5/16″ UNC button head screws to maintain the super low profile using our shorter version heavy duty rubber boots, plus a nylon lined premium quality 2 into 1 throttle cable with low profile 90 degree lower fittings.

Important Notes- The cables screw directly into the top of these taller carbs for better clearance. The new super short mounting flange set move the carbs further forward eliminating any previous fouling issues with the petcocks whilst also allowing the OEM air-box rubber boots to be inserted into the carb spigots. Once you have the carbs synchronized ( see our cable fitment and carb sync video at the top of the menu) and you have the boots in place, we suggest you tape around the carb spigot and again approx 4mm down the rubber boot to then apply a tidy bead of fuel resistant silicon to seal any air gaps. On the earlier models our supplied 5/16″ button head screws may not be a thread match where you will need to source your own screws with low profile heads.

You will instantly experience better throttle response, improved acceleration, increased horsepower and torque.

All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to make contact with using the provided tracking number.

Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

1. TM32-1 32mm TM Mikuni Carburetor
2 × 1. TM32-1 32mm TM Mikuni Carburetor

Only 4 left in stock

$295.00 AUD
VM22/210 Mikuni Pilot Jet (Most VM Carbs) - 27.5
2 × VM22/210 Mikuni Pilot Jet (Most VM Carbs) - 27.5

In stock

$13.20 AUD
6 Series Mikuni Needles (All available shown on sales drop list) - 6DH3
2 × 6 Series Mikuni Needles (All available shown on sales drop list) - 6DH3

In stock

$27.50 AUD
Mikuni 389 Series Needle Jet - P-0
2 × Mikuni 389 Series Needle Jet - P-0

In stock

$33.00 AUD
4/042 Mikuni Main Jet (Large Hex) - 220
2 × 4/042 Mikuni Main Jet (Large Hex) - 220

In stock

$13.20 AUD
4/042 Mikuni Main Jet (Large Hex) - 230
2 × 4/042 Mikuni Main Jet (Large Hex) - 230

In stock

$13.20 AUD
4/042 Mikuni Main Jet (Large Hex) - 240
2 × 4/042 Mikuni Main Jet (Large Hex) - 240

In stock

$13.20 AUD
Triumph Norton BSA Twin 1050mm 90 Deg  2-1 Cable Kit Mikuni TM's - T140E MK3 Switchblock
1 × Triumph Norton BSA Twin 1050mm 90 Deg 2-1 Cable Kit Mikuni TM's - T140E MK3 Switchblock

In stock

$88.00 AUD
Gasket- Replacement for 34mm ID Mikunioz Alloy Stub Flange with 51-58 Centres
2 × Gasket- Replacement for 34mm ID Mikunioz Alloy Stub Flange with 51-58 Centres

In stock

$8.80 AUD
Mikuni Stub Flange Super Narrow, 32mm Bore, 40mm spigot,51-58mm Stud centres
2 × Mikuni Stub Flange Super Narrow, 32mm Bore, 40mm spigot,51-58mm Stud centres
Gasket is not included.

In stock

$38.00 AUD
Mikuni Rubber Carb Mounting Sleeve, 40mm ID Both Ends- EXTRA SHORT.
2 × Mikuni Rubber Carb Mounting Sleeve, 40mm ID Both Ends- EXTRA SHORT.

In stock

$29.50 AUD
Button Head Bolt, 5/16" UNC Thread x 3/4" long
4 × Button Head Bolt, 5/16" UNC Thread x 3/4" long

In stock

$2.20 AUD