Air-box Adapter TM Mikuni Carbs-62.2mm spigot, 60mm Dia x 12mm ext.

Description

This Mikuni Carburetor air-box adapter for TM36-2, TM38-85 and TM38-86 carbs with a slightly larger 62.2mm spigot diameter than our TMX carbs at 62mm. It is designed for use on motorcycles requiring a 12mm extension when wanting to use the standard OEM air-box. This adapter may require shortening for some applications where correct length sleeves are not available. The adapter is made from silver anodized aluminum with a 2mm wall thickness for strength and rigidity. This air filter, air cleaner, air box adapter sleeve has been designed and manufactured for a good interference fit over the Mikuni carburetor spigot.

The sleeve has a 62.2mm ID at the carburetor spigot with a 12mm extension at 60mm OD.

This spigot must be installed by a competent person. When fitting the sleeve we recommend the use of a high strength 620 Loctite retaining compound or high strength two pack epoxy. The adhesive besides helping bond both items together will fill and seal any imperfections found on some carburetor spigots and also acts a a slight lubricant for the fitment.

ALWAYS CHECK YOUR CARBURETOR SPIGOT FOR CORRECT DIAMETER AND ROUND AS SOME CARBS HAVE SIZE DISCREPANCIES WHICH WE HAVE FOUND TO REQUIRED HEATING OF THE NEW RING AND COOLING OF THE CARB TO ENABLE A PRESS ON FITMENT.