Mikuni RS36 Carb Kit- Suzuki thru 2000 Bandit Air/Oil Cooled

$1,320.00 AUD$1,420.00 AUD

Description

This Mikuni RS36 carburetor Kit is for direct fitment to most Suzuki Bandit Air/Oil Cooled Engines. They will breathe a whole new lease of life into your machine with an up to 25% increase in power, whilst making it perform and operate as it should with no hesitations or flat spots. Also available in the more popular RS38 size.

You will very quickly realize that the expense of a rebuild of your old worn OEM carbs can far exceed the cost of these new units and unfortunately as with many rebuilds now days you only have the option in many cases of gambling with very poor quality aftermarket parts. Considering this and if intending to ride and enjoy your motorcycle it makes good sense to retire your OEM carbs into the cupboard and step up to a set of RS’s.

Before rushing in and ordering please firstly check your carb spacing and carbie sizes for compatibility. These are not suited for downdraft engines.

This Mikuni kit comes with the carb  throttle port  center to center spacing’s listed below for direct fitment to Suzuki Bandit air/oil cooled Engines.

A= 77mm (spacing center to center between carb 1 & 2)
B= 93mm (carb 2 & 3)
C= 77mm (carb 3 & 4)

The carb total front to back length of 100mm replaces OEM carbs measuring 96 thru 100mm and comes with either a 55mm inlet outside diameter for use with POD filters or velocity stacks or with fitted sleeves increasing the inlet diameter to 58mm or 62mm for standard air-box compatibility. Do check your inlet diameter if wanting to use your air box as have found the odd carbs with larger size where we need to fit 62mm sleeves rather than 58. The OEM carbs are oval where when taking an average across the horizontal and vertical measurements you’ll determine the best suited option. The carb outlet diameter at the motor end is 42mm.

All sleeves are CNC machined, silver anodized and permanently set in place using 620 Loctite.

PLEASE SELECT YOUR CARBURETOR AIR-FILTER AND ENGINE END, OUTLET SPIGOT DIAMETERS WHEN PURCHASING 

Pilot Jet: VM28/486-17.5, Needle: 9DZH5-50, Needle Jet: P-4 (568 Series), Main Jet: N100.604-120/130

Your stock throttle cables will match to these carbs, where we also have available in the RS accessories page either our road bike throttle and cable assembly (KRS-001) or a Quick action 1/4 turn throttle and cable kit (PPQA40K)
You can also buy separately either POD filters or Velocity stacks which have no form of filter in them (15, 30,50 and 75mm long) for racing

All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to make contact with using the provided tracking number.

Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply.

Additional information

Select your Inlet diameter

55mm Inlet for PODs, 58mm Air Box Match, 62mm Air Box Match

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.