Description
This 2 into 1 cable assembly is for use on Yamaha XS250, XS400 and XS650 models using the OEM throttle when fitting Mikuni VM carbs ranging from VM30 through to VM38 and all TM non pump Mikuni carburetors over 32mm. The total cable length from the 70 degree elbow at the carbs to the elbow on the throttle fitting is 1050mm.
These premium grade cables use a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance. They are supplied with shortened 70 degree lower cable end fittings for better petcock clearance, an inline adjuster on the top cable and a chrome OEM type top fitting for attachment to the stock Yamaha XS throttle housing.
All throttle cables must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with water proof grease.
If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1. This effectively washes away dirt from the cable, without clogging it.
Reviews
There are no reviews yet.