Flat slide Carbs w.Accellerator Pumps
Showing 145–168 of 269 results
-
Mikuni Rubber Carb Mounting Sleeve, 40mm ID Both Ends
$29.50 AUD -
Mikuni Rubber Carb Mounting Sleeve, 40mm ID Both Ends- EXTRA SHORT.
$29.50 AUD -
Mikuni Rubber Reducing Boot/Sleeve-40mm to 35mm ID
$29.70 AUD -
Mikuni Slim Stub Flange 34mm ID, 40mm OD,65-75mm Stud centres, 4mm Base
$38.00 AUD -
Mikuni Stub Flange/Boot 38mm ID, 43.5mm spigot OD,56-78mm Stud centres
$59.50 AUD -
Mikuni Stub Flange/Boot 38mm ID, 43.5mm spigot OD,56-78mm Stud Centres
$59.50 AUD -
Mikuni TM42, HSR Push Pull Quick Action Throttle & Cables Combo
$155.00 AUD -
MuZ MZ Skorpion 660 Mikuni TM38 Flatslide Single Carb Conversion Kit
$630.00 AUD -
MuZ MZ Skorpion 660 Mikuni TM40 Pumper Single Carb Conversion Kit.
$1,035.00 AUD -
MuZ MZ Skorpion 660 Mikuni TM42 Pumper Single Carb Conversion Kit, LH Throttle
$1,220.00 AUD -
MuZ MZ Skorpion 660 Mikuni TM42 Pumper Single Carb Conversion Kit.
$1,020.00 AUD -
N100.604 Mikuni Main Jet, Large Round 8mm Head with 5mm Thread
$13.20 AUD -
N124.063 O-ring Accelerator Pump Nozzle
$2.20 AUD -
N133.200 Mikuni Needle & Seat Viton Tip (KV/10 O-ring not included)
$44.00 AUD -
N133.363 Drain Screw, Bowl TM33-8012
$6.60 AUD -
N138.187 Spring, Pilot mixture screw for Mikuni TM33-8012
$3.30 AUD -
N148.013 Cap, Vacuum Fitting
$4.40 AUD -
N150.048 Rubber Boot, Accelerator Pump Rod TM33-8012
$9.90 AUD -
N189.169o Clip, Idle Adjuster Cable TM33-8012
$13.20 AUD -
Norton 2-1 Mikuni Single Carb Manifold, 850 Commando USING VM36 (43mm spigot)
$240.00 AUD -
Norton 2-1 Mikuni Single Carb Manifold, Commando USING VM34 (40mm spigot)
$240.00 AUD -
Outlet Adapter Sleeve for Increasing Mikuni 40mm spigot to 44mm
$28.60 AUD -
Outlet Adapter Sleeve for Increasing Mikuni 40mm spigot to 52mm
$28.60 AUD -
Outlet Adapter Sleeve for Increasing Mikuni TM40-6 44mm to 47mm
$28.60 AUD